Another option Is I could cut it for you if you are happy to post it . You can contact me through my website @ www.brightongemstones.co.uk
Another option Is I could cut it for you if you are happy to post it . You can contact me through my website @ www.brightongemstones.co.uk
Teeth per inch. Or threads per inch in a different context.
Jewellers saw blades aren't often measured in TPI, they're sold by number 8-1 (coarser to fine) then 1/0-8/0 (fine, finer, finest).
https://www.cooksongold.com/blog/buy...to-saw-blades/
I tend to use 2/0 & 4/0 from about 0.7mm through to 6mm (in steel), but I'm a bit odd that way.
If you have a 7inch saw then you can do it you will just need to turn it round to get the depth of cut , https://www.ebay.co.uk/itm/163508830...id=EB12875558& I used one of these for years before I got my 10" one
What sort of Amber were you looking for .
Bookmarks